The SpectralLED® Fiber Optic Output configuration provides flexible illumination for applications where space is limited.
Systems can be configured with multiple outputs enabling several devices to be simultaneously illuminated at different working locations. Collimating optics are included at the fiber distal end, and custom fiber diameters and lengths are available.
The SpectralLED Tunable Light Source incorporates up to 35 discrete wavelengths for synthesis of commercially available light sources or based on spectra that you import. The platform is easily adaptable for automated test systems and production line integration, with integrated optical feedback and temperature control to ensure rock-solid stability and consistent results.
Applications
- Fluorescence excitation
- Camera and image sensor calibration
- Photodiode detector responsivity characterization
- Spectrum / illuminant simulation
- Diagnostic medical imaging
Unprecedented Resolution & Accuracy
- Wavelength options from the UVA to the Near Infrared
- Quickly simulate any CIE Illuminant or Macbeth™ / X- RITE™ Color Patch
- Built-in RMS spectral fitting for simulation of user imported spectra
- Constant current drivers & built-in optical feedback ensure accurate & flicker-free output in real-time
- All solid-state design for rapid start-up, repeatable performance and long operating lifetime
- ISO/IEC 17025 accredited by NVLAP (NVLAP lab code 200823-0) for calibration accuracy
Fiber Outputs | Fiber Length | Fiber Diameter |
|---|---|---|
4 | 1.5 m | 6.35 mm |
[Most systems are custom configured – please consult factory] | ||
Please contact us with your custom & OEM requirements
| RS-7-3 Specifications | |
|---|---|
| Optical Geometry | Typically 0.55 NA (fiber dependent) |
| Spatial Uniformity | Typically > 70% (fiber dependent) |
| Radiance Range | Up to 500 µW/cm2 (at 5cm, fiber and spectrum dependent) |
| Luminance Range | Up to 1,000 lux (fiber and spectrum dependent) |
| Optical Specifications | |
| Spectral Range | 380 nm to 1,000 nm (Custom ranges are available on request, including SWIR options) |
| Spectral Output | 32 discrete LED channels + 3 broadband LED Channels Visible resolution ~ 15 nm, NIR resolution ~ 50 nm (typical channel spacing) |
| Spectral Bandwidth | Typical: Visible 20nm FWHM, NIR 50nm FWHM |
| CCT Range | 1,900K to 40,000K |
| Preset Spectra | CIE Illuminants A, B, C, D50, D55, D65, D75, E, F1-F12, MacbethTM / X-RiteTM Color Patches |
| Custom Preset Spectra | Configurable at time of order via API. Contact factory for details |
| Accuracy Specifications | |
| Illumination Stability | ≥ 99.99% after 50 ms for radiance or after 2,000 ms for color |
| Illumination Accuracy | ± 1% Absolute, NIST traceable |
| Spectral Accuracy | ± 1 nm centroid wavelength |
| Color Accuracy | CIE 1931 x, y ± 0.003 |
| Linearity | < 1 % RMS of full scale |
| Temperature Stability | Within ± 1° C via active TEC |
| Long-term Drift | Output ≤ 2% Spectral ≤ 1 nm (channel dependent) |
| Electrical Specifications | |
| Electrical Resolution | 16 bit DAC for channel current drivers 24 bit ADC for internal radiance monitor feedback |
| Dynamic Range Adjustment | 4-5 decades typical (spectrum dependent) |
| LED Control | Pure DC constant current with floating differential sensing |
| General Specifications | |
| Software | Firmware includes full spectral calibration with spectral fitting, preset storage, real-time optical feedback, radiometric and photometric units supported |
| Interface Connectors | USB 2.0 type B and DB-9 |
| Interface Protocol | Simple ASCII commands with optional binary block transfer |
| Supported Operating Systems | USB drivers for Windows, OSX and Linux via FTDI virtual COM port Legacy RS-232 serial port for integration (no OS required) |
| Input Voltage and Power | 100 to 240 VAC at 50-60Hz, 600W maximum |
| Dimensions | Height 405mm (16 in), Width 460mm (18.1in), Depth (305mm (12in). Weight 17.5 kg (38.6 lbs) |
| Upgrades | |
| RS-7 Wavemon™ | Multi-channel photodiode system provides amplitude feedback & real-time wavelength measurements |
| Specifications are subject to change without notice | |
Most systems are custom-configured. Please contact the factory to discuss your needs in terms of number of fibers, fiber type, fiber length and fiber termination options.
RS-7 WavemonTM Multi-channel photodiode system with amplitude feedback and real-time wavelength measurement
The Wavelength Monitor System is a multi-channel photodiode system which provides amplitude feedback and real-time wavelength measurements. It consists of three photodiodes each with an independent transimpedance amplifier circuit. Proprietary optical filtering techniques allows for wavelength accuracy of +/-0.25nm and repeatability of +/-0.05nm. The Wavelength Monitor PCBA, photodiodes, and optical filter assembly is temperature stabilized using a Peltier cooler and thermistor in a PID feedback loop. This assembly is a discrete module which can be used with any RS-7 model.
